Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
ACS Appl Mater Interfaces ; 16(15): 19858-19865, 2024 Apr 17.
Artículo en Inglés | MEDLINE | ID: mdl-38591845

RESUMEN

In this study, we examine the surface-derived electronic and chemical structures of nanostructured GaRh alloys as a model system for supported catalytically active liquid metal solutions (SCALMS), a novel catalyst candidate for dehydrogenation reactions that are important for the petrochemical and hydrogen energy industry. It is reported that under ambient conditions, SCALMS tends to form a gallium oxide shell, which can be removed by an activation treatment at elevated temperatures and hydrogen flow to enhance the catalytic reactivity. We prepared a 7 at. % Rh containing the GaRh sample and interrogated the evolution of the surface chemical and electronic structure by photoelectron spectroscopy (complemented by scanning electron microscopy) upon performing surface oxidation and (activation treatment mimicking) annealing treatments in ultrahigh vacuum conditions. The initially pronounced Rh 4d and Fermi level-derived states in the valence band spectra disappear upon oxidation (due to formation of a GaOx shell) but reemerge upon annealing, especially for temperatures of 600 °C and above, i.e., when the GaOx shell is efficiently being removed and the Ga matrix is expected to be liquid. At the same temperature, new spectroscopic features at both the high and low binding energy sides of the Rh 3d5/2 spectra are observed, which we attribute to new GaRh species with depleted and enriched Rh contents, respectively. A liquefied and GaOx-free surface is also expected for GaRh SCALMS at reaction conditions, and thus the revealed high-temperature properties of the GaRh alloy provide insights about respective catalysts at work.

2.
Artículo en Inglés | MEDLINE | ID: mdl-37890003

RESUMEN

The oxidation of the aqueous H3PO3 in contact with Pt was investigated for a fundamental understanding of the Pt/aqueous H3PO3 interaction with the goal of providing a comprehensive basis for the further optimization of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). Ion-exchange chromatography (IEC) experiments suggested that in ambient conditions, Pt catalyzes H3PO3 oxidation to H3PO4 with H2O. X-ray photoelectron spectroscopy (XPS) on different substrates, including Au and Pt, previously treated in H3PO3 solutions was conducted to determine the catalytic abilities of selected metals toward H3PO3 oxidation. In situ ambient pressure hard X-ray photoelectron spectroscopy (AP-HAXPES) combined with the "dip-and-pull" method was performed to investigate the state of H3PO3 at the Pt|H3PO3 interface and in the bulk solution. It was shown that whereas H3PO3 remains stable in the bulk solution, the catalyzed oxidation of H3PO3 by H2O to H3PO4 accompanied by H2 generation occurs in contact with the Pt surface. This catalytic process likely involves H3PO3 adsorption at the Pt surface in a highly reactive pyramidal tautomeric configuration.

3.
ACS Appl Mater Interfaces ; 15(40): 47725-47732, 2023 Oct 11.
Artículo en Inglés | MEDLINE | ID: mdl-37774118

RESUMEN

Gallium is widely used in liquid metal catalyst fabrication, and its oxidized species is a well-known dielectric material. In the past decades, these two species have been well studied separately. However, the surface oxide layer-induced impact on the chemical and electronic structure of (liquid) gallium is still mostly unclear because of the extreme fast formation of thermodynamically stable surface Ga2O3. In this study, we used a combination of direct and inverse photoemission complemented by scanning electron microscopy to examine the surface properties of Ga and Ga oxide (on a SiOx/Si support) and the evolution of the surface structure upon stepwise oxidation and subsequent reduction at an elevated temperature. We find oxidation time-dependent self-limited formation of a substoichiometric Ga2O3-δ surface layer on the Ga nanoparticles. The valence band maximum (conduction band minimum) for this Ga2O3-δ is located at -3.8 (±0.1) eV [1.4 (±0.2) eV] with respect to the Fermi level, resulting in an electronic surface band gap of 5.2 (±0.2) eV. Upon annealing in ultrahigh vacuum conditions, the Ga2O3-δ surface layer can efficiently be removed when using temperatures of 600 °C and higher. This study reveals how the surface properties of Ga nanoparticles are influenced by stepwise oxidation-reduction, providing detailed insights that will benefit the optimization of this material class for different applications.

5.
Sci Rep ; 13(1): 4458, 2023 Mar 17.
Artículo en Inglés | MEDLINE | ID: mdl-36932106

RESUMEN

Isolated active sites have great potential to be highly efficient and stable in heterogeneous catalysis, while enabling low costs due to the low transition metal content. Herein, we present results on the synthesis, first catalytic trials, and characterization of the Ga9Rh2 phase and the hitherto not-studied Ga3Rh phase. We used XRD and TEM for structural characterization, and with XPS, EDX we accessed the chemical composition and electronic structure of the intermetallic compounds. In combination with catalytic tests of these phases in the challenging propane dehydrogenation and by DFT calculations, we obtain a comprehensive picture of these novel catalyst materials. Their specific crystallographic structure leads to isolated Rhodium sites, which is proposed to be the decisive factor for the catalytic properties of the systems.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...